RO Antiscalant - Genesys SI
Key Features
| Brand | : | Genesys |
| Model | : | Genesys SI |
| Origin | : | UK |
| Appearance | : | pale amber liquid |
| pH as supplied | : | 9.8 – 10.2 |
| Specific gravity | : | 1.13 – 1.17 |
| Freezing point | : | - 4ºC |
| View More Info | ||
antiscalant specially
formulated to control silica fouling and prevent scale formation in Reverse
Osmosis (RO) and Nano-Filtration (NF) systems. Developed by Genesys
International (UK), this advanced liquid antiscalant is designed to deliver
exceptional protection in feed water with high levels of silica, calcium, and
sulphates.
In any RO system, scale
build-up is one of the biggest causes of membrane fouling and performance
decline. Even a thin layer of scale can dramatically reduce water flow,
increase pressure, and shorten membrane life. Genesys SI offers a
powerful solution by preventing the formation and growth of mineral scales,
allowing your system to operate at higher recovery rates with lower maintenance
and chemical costs.
SuperiorSilica and Scale ControlSilica scaling is one ofthe most
Unlike common salts such as
calcium carbonate, silica forms a hard, glass-like layer that is nearly
impossible to remove once deposited. Genesys SI is engineered using a
unique blend of active inhibitors that stop silica molecules from bonding
together. This keeps silica in a soluble state so it passes safely through the
system without forming scale.
In addition to silica
control, Genesys SI effectively inhibits the precipitation of other
scale-forming salts, including:
- Calcium carbonate
- Calcium sulphate
- Barium sulphate
- Strontium sulphate
This wide-spectrum
protection ensures consistent membrane performance even under high recovery and
variable feed conditions.
- Extends Membrane Life:
Regular use of Genesys SI protects RO and NF membranes from irreversible fouling, ensuring stable long-term operation and reduced replacement costs. - Increases Recovery Rate:
By preventing scale formation, the system can operate at higher recovery levels, reducing wastewater and improving efficiency. - Minimises Cleaning Frequency:
With reduced fouling and deposit build-up, membrane cleaning intervals are extended — saving time, water, and labour costs. - Reduces Operating Costs:
Less downtime, fewer chemicals, and longer membrane life translate directly to lower overall operational expenses. - Environmentally Friendly:
Genesys SI reduces the need for acid dosing and is safe for potable water applications, aligning with modern environmental and safety standards.
- al growth so that scale-forming salts remain dissolved.
- Disperse suspended solids and colloids to prevent them from adhering to membrane surfaces.
- Stabilise silica
by preventing polymerisation and aggregation, keeping it in a soluble form
that can be easily flushed out.
The result is clean, smooth membrane
surfaces, reduced fouling, and consistent permeate quality over long
operational cycles.
Applications
Genesys SI is suitable for a wide range of RO and NF
installations, including:
- Municipal drinking water treatment plants
- Desalination and brackish water systems
- Industrial process water treatment
- Power generation and boiler feed systems
- Food and beverage manufacturing
- Electronics and pharmaceutical industries
It is especially beneficial for
plants using groundwater or surface water sources with high silica
concentrations, where traditional antiscalants may fail.
Easy
Dosing and Compatibility
Genesys SI is supplied as
a liquid concentrate that is easy to handle and dose. It should be injected
continuously into the feed water before cartridge filters to ensure full system
protection. The product can be diluted with permeate or demineralised water for
convenient dosing.
Typical dosage rates range
from 2–5 mg/L, depending on feed water chemistry and recovery rate.
Genesys SI is fully compatible with all polyamide RO and NF membranes,
stainless steel, and most system construction materials. It is also
non-corrosive and safe for operators when used as directed.
High
Purity and Safe for Drinking Water
Genesys SI meets international
drinking water standards and is approved for use in potable water applications.
It contains no hazardous components, heavy metals, or harmful by-products. This
makes it suitable for both municipal and industrial systems where high water
quality is essential.
Long-Term
Reliability
With its proven performance
across thousands of installations worldwide, Genesys SI has become a trusted
choice for operators seeking reliable scale and silica control. Plants using
this antiscalant experience fewer shutdowns, improved permeate output, and more
consistent water quality.
Whether you are running a
small commercial RO system or a large municipal plant, Genesys SI ensures
stable operation, reduced maintenance, and outstanding return on investment.
- Safe for potable and industrial us
| Brand | Genesys |
|---|---|
| Model | Genesys SI |
| Origin | UK |
| Appearance | pale amber liquid |
| pH as supplied | 9.8 – 10.2 |
| Specific gravity | 1.13 – 1.17 |
| Freezing point | - 4ºC |
(0)
Login To Leave Review
EMI Details
T&C