Nanofiltration Elements
Key Features
| Nanofiltration (NF) Membrane Element | : | Product Name Nanofiltration (NF) Membrane Element Membrane Type Thin Film Composite (TFC) Polyamide Technology Nanofiltration (NF) Application Water Softening, Industrial Water Treatment, Partial Desalination Operating Pressure 100 – 300 psi (7 – 21 bar) Salt Rejection Rate 50–99% (Selective Monovalent & Divalent Ions) Permeate Flow Rate High Output Flow (Varies by Model) Feed Water TDS Limit Up to 3,000 ppm (Depending on Model) Operating Temperature Up to 45°C (113°F) pH Range (Continuous Operation) 4 – 10 Cleaning pH Range 2 – 11 Recovery Rate 15 – 50% (Dependent on System Design) Membrane Material Polyamide Thin Film Composite Surface Type Smooth, Anti-Fouling Surface Element Configuration Spiral Wound Feed Spacer Thickness 28–34 mil (Model Dependent) Maximum Feed Flow Rate 75 GPM (8-inch) / 16 GPM (4-inch) Maximum Operating Pressure 600 psi (41 bar for Cleaning Cycles) End Cap Type Standard Male-Female Interlocking Design Outer Shell Material Fiberglass Reinforced Plastic (FRP) Fouling Resistance Excellent – Resistant to Scaling, Biofouling, and Organics Energy Efficiency Moderate Pressure Operation – Energy Saving Design Typical Operating Life 3 – 5 Years (Depending on Feed Water Quality) Storage Temperature 0°C – 35°C (32°F – 95°F) Minimum Salt Rejection 50% – 99% (Selective) Maximum Feed Water SDI ≤ 5 Packaging Type Vacuum-Sealed Polybag with Preservative Solution Compatibility Fits Standard RO/NF Pressure Vessels Certification ISO 9001 / NSF / CE Certified (Depending on Model) Warranty 1-Year Limited Warranty Maintenance Requirement Periodic Cleaning and System Monitoring Recommended Use Industrial, Commercial, and Municipal NF Systems Environmental Benefit Reduced Energy Consumption, Eco-Friendly Operation Installation Type Easy Retrofit into Existing NF/RO Systems Pressure Drop Low – Optimized Flow Design Membrane Surface Area 30–40 m² (Depending on Model) Permeate Quality Retains Monovalent Ions, Reduces Hardness & Sulfates Feed Flow Direction Outside-In Preservative Used Sodium Metabisulfite Solution Net Weight (Approx.) 2.5 – 15 kg (Depending on Size and Model) Country of Origin (Insert Brand or Manufacturer Country) Key Features Selective Ion Rejection, Water Softening, Anti-Fouling, Long Life System Compatibility Industrial, Commercial, and Municipal NF/RO Systems |
| View More Info | ||
–. Nanofiltration Elements:::High-Performance Water Treatment Solution
Introduction
Nanofiltration (NF) Elements are advanced membrane
filtration components designed to provide selective separation of dissolved
salts, hardness, organics, and other contaminants from water. Positioned
between reverse osmosis (RO) and ultrafiltration (UF) technologies, NF
membranes offer unique capabilities that make them ideal for softening,desalination, and industrial water treatment applications.
With
their high rejection of divalent and multivalent ions, NF Elements
reduce water hardness while maintaining essential minerals, delivering
high-quality permeate suitable for both industrial processes and potable water
applications. These membranes are engineered for energy-efficient operation,
long service life, and stable performance, making them a reliable choice
for municipalities, commercial facilities, and industrial plants.
What Are
Nanofiltration Elements?
Nanofiltration
Elements are thin-film composite (TFC) membranes that allow water to pass while selectively removing a portion of dissolved salts, hardness-causing ions (like calcium and magnesium), and organic matter. Unlike RO membranes, NF membranes retain beneficial osite (TFC) membranes that allow water to pass while selectively removing a portion of dissolved salts, hardness-causing ions (like calcium and magnesium), and organic matter. Unlike RO membranes, NF membranes retain beneficial https://processengrbd.com/monovalent ions such as sodium and potassium,
making them suitable for water softening and certain industrial processes.
NF
membranes operate at moderate pressures—generally lower than RO
membranes—offering significant energy savings while maintaining
effective contaminant removal. Their spiral-wound configuration ensures high
permeate flow and efficient space utilization, ideal for industrial and
municipal water treatment systems.
Key
Features of Nanofiltration Elements
- Selective Ion Rejection:
High rejection of divalent and multivalent ions, such as calcium, magnesium, and sulfate, while allowing monovalent ions to pass. - Energy Efficiency:
Operates at moderate pressures, typically 100–300 psi, reducing energy consumption compared to standard RO membranes. - High Permeate Flow:
Optimized membrane surface area ensures high water output without compromising quality. - Durable Construction:
Made from polyamide thin-film composite (TFC) material, resistant to chemicals, pressure variations, and mechanical stress. - Fouling and Scaling
Resistance:
Designed with smooth surfaces and advanced chemistry to minimize biofouling, scaling, and organic buildup. - Stable Performance:
Maintains consistent permeate quality under varying feedwater conditions, ensuring reliability for industrial and commercial applications.
Applications
of Nanofiltration Elements
NF
membranes are versatile and widely used in various water treatment
applications:
- Industrial Water Treatment: Boiler feedwater softening
- Cooling tower makeup water
- Food and beverage
processing water
- Pharmaceutical process
water
- Textile and dyeing industry
water treatment
- Municipal and Community
Water Supply:
- Drinking water softening
- Partial desalination for
brackish water sources
- Removal of hardness and
specific contaminants while maintaining essential minerals
- Commercial Applications:
- Hotels, hospitals, and
commercial buildings for softened water
- Bottled water production
- Water purification for
laundries and car washes
- Specialized Applications:
- Wastewater recycling
- Partial desalination for
agriculture and irrigation
- Pre-treatment for RO
systems to reduce scaling
Operating
Parameters
|
Parameter |
Recommended Range |
|
Operating Pressure |
100 – 300 psi |
|
Feed Water TDS |
Up to 1,500 – 3,000
ppm (varies by model) |
|
Salt Rejection |
50–99% (monovalent
and divalent ions selectively) |
|
Operating Temperature |
Up to 45°C (113°F) |
|
pH Range (Continuous
Operation) |
4 – 10 |
|
Cleaning pH Range |
2 – 11 |
|
Recovery Rate |
15–50% (dependent on
feed water and system design) |
|
Maximum Feed Flow
Rate |
75 GPM (for 8-inch
elements) |
|
Maximum Operating
Pressure |
600 psi (for
short-term operations or cleaning) |
Proper
pretreatment, including sediment filtration, antiscalant dosing, and
chlorine removal, is essential to maximize membrane life and maintain high
performance. Regular monitoring and periodic cleaning will prevent fouling and
scaling while sustaining consistent permeate quality.
Benefits
of Nanofiltration Elements
- Water Softening: Effectively removes
hardness-causing ions while retaining beneficial minerals.
- Energy Savings: Moderate pressure operation
reduces energy consumption compared to RO systems.
- Reduced Fouling: Anti-fouling design reduces
maintenance frequency and extends service life.
- Eco-Friendly Operation: Lower chemical use and
energy consumption promote environmental sustainability.
- Cost-Effective: High durability and low operational
costs improve overall return on investment.
- Versatile Application: Suitable for industrial,
municipal, and commercial water treatment systems.
Why Choose Nanofiltration Elements?
- High-performance membranes
with selective ion rejection.
- Energy-efficient design for low operational costs. Long-lasting, durable
- Consistent water quality for
sensitive industrial and commercial processes.
- Environmentally responsible
solution
with lower chemical and energy usage.
Nanofiltration
Elements are ideal for softening water, partial desalination, and industrial
water treatment, providing a sustainable and efficient solution for modern
water purification challenges.
Conclusion
Nanofiltration
Elements are a cutting-edge solution for water treatment systems that require selective
ion removal, water softening, and high-quality permeate production.Combining durability, energy efficiency, and anti-fouling technology, NF
membranes provide consistent and reliable performance for industrial,
municipal, and commercial applications.
By
using Nanofiltration Elements, users can achieve reduced maintenance, lower
operating costs, and improved water quality, making them an essential
component for efficient, sustainable, and high-performance water treatment
systems.
| Nanofiltration (NF) Membrane Element | Product Name Nanofiltration (NF) Membrane Element Membrane Type Thin Film Composite (TFC) Polyamide Technology Nanofiltration (NF) Application Water Softening, Industrial Water Treatment, Partial Desalination Operating Pressure 100 – 300 psi (7 – 21 bar) Salt Rejection Rate 50–99% (Selective Monovalent & Divalent Ions) Permeate Flow Rate High Output Flow (Varies by Model) Feed Water TDS Limit Up to 3,000 ppm (Depending on Model) Operating Temperature Up to 45°C (113°F) pH Range (Continuous Operation) 4 – 10 Cleaning pH Range 2 – 11 Recovery Rate 15 – 50% (Dependent on System Design) Membrane Material Polyamide Thin Film Composite Surface Type Smooth, Anti-Fouling Surface Element Configuration Spiral Wound Feed Spacer Thickness 28–34 mil (Model Dependent) Maximum Feed Flow Rate 75 GPM (8-inch) / 16 GPM (4-inch) Maximum Operating Pressure 600 psi (41 bar for Cleaning Cycles) End Cap Type Standard Male-Female Interlocking Design Outer Shell Material Fiberglass Reinforced Plastic (FRP) Fouling Resistance Excellent – Resistant to Scaling, Biofouling, and Organics Energy Efficiency Moderate Pressure Operation – Energy Saving Design Typical Operating Life 3 – 5 Years (Depending on Feed Water Quality) Storage Temperature 0°C – 35°C (32°F – 95°F) Minimum Salt Rejection 50% – 99% (Selective) Maximum Feed Water SDI ≤ 5 Packaging Type Vacuum-Sealed Polybag with Preservative Solution Compatibility Fits Standard RO/NF Pressure Vessels Certification ISO 9001 / NSF / CE Certified (Depending on Model) Warranty 1-Year Limited Warranty Maintenance Requirement Periodic Cleaning and System Monitoring Recommended Use Industrial, Commercial, and Municipal NF Systems Environmental Benefit Reduced Energy Consumption, Eco-Friendly Operation Installation Type Easy Retrofit into Existing NF/RO Systems Pressure Drop Low – Optimized Flow Design Membrane Surface Area 30–40 m² (Depending on Model) Permeate Quality Retains Monovalent Ions, Reduces Hardness & Sulfates Feed Flow Direction Outside-In Preservative Used Sodium Metabisulfite Solution Net Weight (Approx.) 2.5 – 15 kg (Depending on Size and Model) Country of Origin (Insert Brand or Manufacturer Country) Key Features Selective Ion Rejection, Water Softening, Anti-Fouling, Long Life System Compatibility Industrial, Commercial, and Municipal NF/RO Systems |
|---|
(0)
Login To Leave Review
EMI Details
T&C